[toddsworth3]

Bought used set of artillian pallet forks, quick tatch adapter, quick hitch and 54” blade. I’m looking for instructions on how to set the proper adjustment for the artillian JD adapter bracket that comes with the kit. Anyone know where I can get a copy of these?

 

[coaltrain]

Maybe from Artillian?

 

[JimR]

I'm not sure what "adjustment" you're looking for. There isn't anything to adjust on the adapter bracket.

 

[toddsworth3]

I'm not sure what "adjustment" you're looking for. There isn't anything to adjust on the adapter bracket.

this thing. there are 4 holes and i believe there are instructions for where to set them in relation to the skid shoes and wear bar. figured i asked on here before i called artillian. no instructions on there website that i seen.

 

[JimR]

Ah! That's the bracket that replaces the hydraulic lift cylinder on the QuickTach hitch. I don't recall there ever being any specific instructions for it. Somewhere ion the site here we had a discussion about it years ago and Chris (teh founder of Artillian) said essentially "Set your plow flat on the floor, adjust your fork frame so that it is straight up and down and pick the hole that is the closest fit."

I'll have to look for that thread. Personally, I didn't see any difference between the holes. I think I picked one of the two center holes and just left it there.

 

[vt2305]

I set mine so the loader curl is all the way back and the angle of the plow is not too aggressive for my gravel driveway. Just try it in a couple spots and see what works best. No wrong answer to that adjustment.


Sent from my iPhone using Tapatalk

 

[toddsworth3]

Ah! That's the bracket that replaces the hydraulic lift cylinder on the QuickTach hitch. I don't recall there ever being any specific instructions for it. Somewhere ion the site here we had a discussion about it years ago and Chris (teh founder of Artillian) said essentially "Set your plow flat on the floor, adjust your fork frame so that it is straight up and down and pick the hole that is the closest fit."

I'll have to look for that thread. Personally, I didn't see any difference between the holes. I think I picked one of the two center holes and just left it there.

I set mine so the loader curl is all the way back and the angle of the plow is not too aggressive for my gravel driveway. Just try it in a couple spots and see what works best. No wrong answer to that adjustment.


Sent from my iPhone using Tapatalk

great. thank you. i will try that. seems rather simple.