Green Tractor Talk banner
1 - 4 of 4 Posts

·
Super Moderator
Joined
·
6,915 Posts
The 2025 has the same brake setup as my 2032r. 2 pedals side-by-side and there is a metal "brake pedal latch" that flips up/down to "bridge" the two pedals so that they can be used as one single pedal if desired.

The manual tells you to apply both brake pedals when engaging the parking brake but , IME, it will engage just fine any time the machine is stopped. One, pedal, two pedals, no pedals... it doesn't seem to matter on my machine.

Cruise control is connected to the right brake pedal so engaging the right (or both together) will disengage cruise control. Applying the left brake only will NOT disengage cruise control.

You don't need to turn your foot sideways to engage both brakes when they aren't latched. You can depress both pretty easily if you plant your foot dead center.

All of this can be found in the owner's manual (which should be available on-line!).
 

·
Super Moderator
Joined
·
6,915 Posts
No problem! Hopefully that answers your questions well enough to help you make your decision!
 
  • Like
Reactions: FormulaB

·
Super Moderator
Joined
·
6,915 Posts
Sorry. Can't help on that one. I haven't run across a breakdown for the 2025R/2032R yet.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top