Green Tractor Talk banner

1 - 3 of 3 Posts

·
Super Moderator
Joined
·
5,942 Posts
A Cat 1 lift pin would be 7/8" (0.875") so a ball for it should be just over that (which appears to be what you have).

A Cat 2 lift pin would be 1 1/8" and would be to large to fit through that ball.

(You appear to be measuring it against a Cat 1 toplink pin which would be 3/4". Toplink pins and lift pins are different diameters.)
 
  • Like
Reactions: SRG and 61uno

·
Registered
Joined
·
5,392 Posts
A Cat 1 lift pin would be 7/8" (0.875") so a ball for it should be just over that (which appears to be what you have).

A Cat 2 lift pin would be 1 1/8" and would be to large to fit through that ball.

(You appear to be measuring it against a Cat 1 toplink pin which would be 3/4". Toplink pins and lift pins are different diameters.)
X2


Dave
 
1 - 3 of 3 Posts
Top