Green Tractor Talk banner
1 - 1 of 1 Posts

·
Super Moderator
Joined
·
7,367 Posts
A Cat 1 lift pin would be 7/8" (0.875") so a ball for it should be just over that (which appears to be what you have).

A Cat 2 lift pin would be 1 1/8" and would be to large to fit through that ball.

(You appear to be measuring it against a Cat 1 toplink pin which would be 3/4". Toplink pins and lift pins are different diameters.)
 
  • Like
Reactions: SRG and 61uno
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top