Green Tractor Talk banner

1 - 7 of 7 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
2013 JD 3320 HST 4 way flashers work correctly. Turn signals do not. Press left signal button and both left and right lights light up but do not flash, press the right signal button and both left and right lights flash. My 3320 has a single toggle switch left of the steering wheel. I checked fuses and looks fine, checked the ground wire inside both light housing and they are good. I can’t find a flasher control or a relay. Do these 3320s have a flasher or is it controlled in the computer? Any thoughts on what I should do? Thanks! Josh
 

·
Administrator
Joined
·
17,963 Posts
:wgtt:


Cab or open?
 

·
Administrator
Joined
·
17,963 Posts
OK I only have the tech manual for the CAB tractors, hopefully someone will looks up the diagrams for you.
 

·
Administrator
Joined
·
17,963 Posts
Does your diagram show a relay or flasher control anywhere
Didn't try looking...heading out now I'll try to do it in the morning.
 

·
Administrator
Joined
·
17,963 Posts
Here is the operation, I found references to a K8 and K9 flasher relay but it's not real clear where they are. In my cab machine there is a bunch in the right console, not sure on the open station machines.
 

Attachments

1 - 7 of 7 Posts
Top