Green Tractor Talk banner

1 - 6 of 6 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I am new here but I am hoping to get some help on my 2013 5083e that won’t move. I was loading hay with it and I jumped out for a few minutes and jumped back in and tried to move the tractor and nothing. The tractor won’t move forward or reverse. There is no trouble codes or anything on the dash. All the other hydraulics are working properly. I noticed some last winter the tractor wouldn’t move forward until it warmed up some. I’m not sure if this has anything to do with it. I have checked the hydraulic fluid level and it is perfect. I also checked the fuses to see if the reverser fuse is blowed and it wasn’t. I don’t know what else to do. Any help or insight would be greatly appreciated.
Thanks
 

·
Registered
Joined
·
87 Posts
Check your fuses, I do not have the data handy, but ours does this once in a while. the one you are looking for is center or just right of center in the fuse block. Also might check the electrical connection on the transmission.
 

·
Premium Member
Joined
·
7,898 Posts
Do these tractors have an "operator presence" seat switch??
 
1 - 6 of 6 Posts
Top