Green Tractor Talk banner

JD 6210 three point hitch problem

12747 Views 7 Replies 6 Participants Last post by  Farmhand22
I have a 1999 model 6210 w/o a cab. I bought it at an auction and knew that the 3 pt hitch was not working. My mechanic tells me that the Hitch Control unit is bad. It is corroded inside and appears to have been wet. He said that this is a recurring problem.

It has a 640 FEL that works fine.

I don't mind spending the money to fix it (as I said, I knew it had a problem).

I am wondering if this really is a recurring problem, is there a fix to prevent a reoccurrence?

Any input would be appreciated.

Thanks.
1 - 2 of 8 Posts
I'm a new member and I'm trying to do a search without creating a new thread. I have a similar problem as listed above. My tractor (2005 JD 6415, cab, 2wd) is not lifting or lowering the lift arms. I've surfed the internet trying to find info. Here's my current situation.

Tractor running no up or down

Tractor off, turn the key on and stepper motor may buzz once then no more. Turn switch off and then back on may not buzz at all. Turn switch off then back on stepper motor may buzz several times. *no certain order listed above*

Put a test light on the stepper motor plug (unplugged from the stepper motor itself) to see if getting voltage to the motor and it will only blink. No constant power as shown by the test light.

Before I spend $500 on a stepper motor is their anything else I can check or does this sound like the issue? Any help would be greatly appreciated. Thanks
Also, the arms will go up and down by turning the screw on top of the stepper motor. Sorry, forgot to list that above. Thanks
1 - 2 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top