Green Tractor Talk banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
OK, so I was mowing with my JD 2640 and the JD 717 in tow when the slip clutch went on the JD 717. I've adjusted it out (previous owner wore it out I believe) and it still is slipping horribly. What parts do I need to replace in the clutch. The JD 717 is a little different than most slip clutches I looked up online. Has the four bolts that you loosen to adjust the clutch slippage. Thank you. picture is what it looks like.
 

Attachments

·
Registered
Joined
·
3 Posts
Discussion Starter #3
Good news! Thanks Jim!!! I looked up online and the whole setup was 800+!!!! So I am totally relieved. The clutch disc are worn bad so I will start with that! thank you sir!!!!! And thank you soooo much for the welcome!
 

·
Premium Member
Joined
·
272 Posts
Slip clutch discs

Check out Agrifab for the friction discs. Measure yours for outer and inner diameter first. They've got all sizes. My experience has been that JD dealers don't have just the friction discs. Agrifab had discs for my Frontier 647 tiller for less than $30. Call Agrifab.
 
1 - 4 of 4 Posts
Top