Green Tractor Talk banner

1 - 9 of 9 Posts

·
Administrator
Joined
·
18,001 Posts
Which model? Most of the Frontier branded forks (JD does not make any) are way to heavy for a 1-series at near 400 pounds.

Yes, forks are one of a handiest things you can have :good2:
 

·
Premium Member
Joined
·
12,278 Posts
Most will agree. It's the most used loader accessory AFTER Ken's hooks and shackles. :) My tractor is forked up most of the time. :)
 

·
Registered
Joined
·
2,773 Posts
The AP10F are the new small lighter forks for the 1 series i take it? Saw them listed but never saw them in person.
 

·
Premium Member
Joined
·
12,278 Posts
The AP10F are the new small lighter forks for the 1 series i take it? Saw them listed but never saw them in person.
The AP10F are targetted towards 1-series and 2-series tractors. The spec out very close to the Artillian forks as far as weight and capacity (at least with 42" tines).

AP10F: Weight 198 lbs. Capacity 1250 lbs (36") 2000 lbs (42") $746

Artillian: Weight 197 lbs. Capacity 2300 lbs (36" and 42") $867

The 36" tines seem to be pushing it a bit as the capacity of the tine is very close to the list capacity of the 2-series loader.

These forks are much better suited to the smaller tractors than the AP11 and AP12 frames.
 
1 - 9 of 9 Posts
Top