Green Tractor Talk banner
1 - 9 of 9 Posts

·
Registered
2015 1025r Mauser Cab, 54” front blower, frontier RB2060 rear blade, ballast box, H120 Loader 53”
Joined
·
41 Posts
Discussion Starter · #1 ·
So my Johnny is a 2015. Trying to decide/find out if my year and bracket is one prone to fail. I read and watched several things regarding this. I have no problem doing the conversion besides the $90 some dollars shipping of $190 part. Welcome to getting things shipped to Ak.🤷‍♂️ So my last numbers of serial are FH311229. This below list doesn’t show mine as one needed fixed? Any thoughts?
Plant Tire Tread Automotive tire Wheel
Plant Tire Tread Automotive tire Wheel
 

·
Registered
2015 1025r Mauser Cab, 54” front blower, frontier RB2060 rear blade, ballast box, H120 Loader 53”
Joined
·
41 Posts
Discussion Starter · #4 ·
You more than likely have the old one like in the pic your showing. I have a 2017 & I had the old one & bought the kit & converted mine. The aluminum bracket that holds the air cleaner tends to break, along with the straps. The bolts may break off the top of the head too. I would replace it. Here is the info from green parts store & if you use Tim's code TTWT you get free shipping.
John Deere Air Cleaner Support Bracket Replacement Kit - LVU29618FIX
Ok thanks I’ll give a whirle!
 

·
Registered
2015 1025r Mauser Cab, 54” front blower, frontier RB2060 rear blade, ballast box, H120 Loader 53”
Joined
·
41 Posts
Discussion Starter · #8 ·
Go to Tractor Time With Tim and he has a parts supplier that you put the code TTWT and get free shipping. Just can't remember the supplier, I believe it is green parts .com, but could be wrong.
Thank You!!
You will need a new air filter box - LVA23405, list $90.54. The box comes with the air filters (at least mine did). Inner filter is LVU34502, outer filter is LVU34503. You will also need the hose LVU33856, list $30.84, and the support LVU34473, $24.90. Plus a few nuts for the support installation. The relocation is somewhat expensive, but as it may save you the cost of a new engine, it will be money well spent.
View attachment 813999 View attachment 814000 View attachment 814001
A TTWT video on the installation is here:
Super helpful! Thank You! Are the part numbers JD part numbers or someone else’s?
 

·
Registered
2015 1025r Mauser Cab, 54” front blower, frontier RB2060 rear blade, ballast box, H120 Loader 53”
Joined
·
41 Posts
Discussion Starter · #14 ·
Hey wow!! Thank You! Just contacted my dealer with this part# MPLV10188 and placed an order for one. $85.63🙏 Hopefully it’s the one and complete kit I need. According to his description it is everything I’ll need fingers crossed. Way cheaper than green parts not sure how or why but I’ll take it!!!
 

·
Registered
2015 1025r Mauser Cab, 54” front blower, frontier RB2060 rear blade, ballast box, H120 Loader 53”
Joined
·
41 Posts
Discussion Starter · #15 ·
Hey wow!! Thank You! Just contacted my dealer with this part# MPLV10188 and placed an order for one. $85.63🙏 Hopefully it’s the one and complete kit I need. According to his description it is everything I’ll need fingers crossed. Way cheaper than green parts not sure how or why but I’ll take it!!!
I should know sometime next week and I’ll let you know.
 

·
Registered
2015 1025r Mauser Cab, 54” front blower, frontier RB2060 rear blade, ballast box, H120 Loader 53”
Joined
·
41 Posts
Discussion Starter · #19 ·
Oh... also... when you remove the bracket from the intake cover, just remove the bracket and nuts. Don't try to take the studs out. We believe they are casted in, and there's no need to remove them.
Thanks. I’ve watched several videos on YouTube about this. Did you put the nuts back on the studs or no?
 

·
Registered
2015 1025r Mauser Cab, 54” front blower, frontier RB2060 rear blade, ballast box, H120 Loader 53”
Joined
·
41 Posts
Discussion Starter · #21 ·
No. No need to. I found that mine had vibrated loose 3 times before it came to light that there was something amiss that JD was now recognizing. This was before the complete kit became available... back in the beginning. My tractor wasn't covered by the fix so I bought the parts outright... at twice the price of the kit. Since I took the bracket off I haven't found a need to have the nuts on. Maybe if you want to bolt on a commemorative plaque? 😄
Where in Mi. Are you? I live in Ak. Since 06 but born and raised in Mi. Alpena until graduation and Gaylord up to moving to Ak.
 

·
Registered
2015 1025r Mauser Cab, 54” front blower, frontier RB2060 rear blade, ballast box, H120 Loader 53”
Joined
·
41 Posts
Discussion Starter · #37 ·
1 - 9 of 9 Posts
Top