Green Tractor Talk banner

1 - 3 of 3 Posts

·
Registered
Joined
·
117 Posts
Discussion Starter #1
Could someone tilt their 420 seat forward and take a picture of the mounting. I have a feeling mine is on wrong, but can't figure out what is right. Either it is bolted in the wrong holes or the springs are just way too weak, I want to make sure it's bolted right before I buy new springs.

Thanx Eric
 

·
Registered
Joined
·
1,585 Posts
Eric,

My supension seat is somewhat different than the plain flip up without suspension, so the photo below may not apply. Also I had an aftermarket "universal-fit"seat so I moved the mounting holes in the flip plate back to use that seat's threaded inserts and still get a proper spacing to the steering wheel. I have also included the parts diagrams from the PC 1924 which may help...

deluxe seat modification.jpg

flip up seat without suspension.jpg

Chuck
 

·
Registered
Joined
·
117 Posts
Discussion Starter #3
Chuck, that parts picture shows where the bolts are suppose to go so that should work. Thanx Eric
 
1 - 3 of 3 Posts
Top