Green Tractor Talk banner

1 - 5 of 5 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter #1
For some reason our 3pt won’t raise but to the height of the pic shown, never has been an issue to after we took out of the barn after sitting for a month or so. Checked all controlls inside and adjusted to top height, but no luck. Is there something I’m missing or can try
 

Attachments

·
Registered
Joined
·
20 Posts
Discussion Starter #4
Codes, as in hooking up to the computer or “red flashing light”.
There isn’t any alarms in the cab, dealership said possible “sensor” ugh wish I knew where it was to replace myself
 

·
Registered
Joined
·
993 Posts
Here is a diagram of the sensor I mentioned. No guarantee of this being the problem without proper diagnosis. Even if it is the problem, the rockshaft will need to be recalibrated after installation for proper operation. It is actually possible no parts are needed if calibration has been lost, calibration alone might fix it. If BCU controllers are ever reprogrammed, it wipes out the calibration and it needs to be redone.
 

Attachments

1 - 5 of 5 Posts
Top