Green Tractor Talk banner

1 - 7 of 7 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Friend has a jd 7420 powerquad with code epc 306061.31 transmission speed too low. We replaced RE 12182 wheel speed sensor but the problem remains. Can anyone tell me what the RE 295932 sensor also mounted on powerquad drive system does? It's mounted next to the wheel speed sensor but I can not find any info of it's function.
 

·
Registered
Joined
·
4,439 Posts
I have no idea, but if you can't find an answer here, ask This guy on youtube. He definitely knows what he's talking about.
 

·
Registered
Joined
·
971 Posts
The RE 295932 is the transmission shaft speed sensor.. The Re12182 is the wheel speed sensor. THe code you have is related to the transmission shaft speed and not wheel speed. If you know how, access epc14 and then start tractor and run in 4th gear. epc14 monitors the transmission shaft speed and in 4th gear, it should match engine speed.
 

·
Registered
Joined
·
7 Posts
Discussion Starter #4
JD110, Thank you for the response. I can get to the epc and see the codes and addresses how ever do not see a 14. Could you enlighten me on how to get to epc 14? His tractor has the dual gauge plus II digital display without HMS.
 

·
Registered
Joined
·
971 Posts
Some addresses are not available in "customer mode". If accessing "technician mode" you have to be careful because some addresses can be changed that affect how things work or can make things not work at all. Instead of waiting at least 4 seconds after turning ignition on to activate roll mode switch, you need to activate roll mode switch before turning key. When dIA is displayed, release roll mode switch and then other addresses should be accessible.
 

·
Registered
Joined
·
7 Posts
Discussion Starter #6
I should have stated the symptoms from the tractor when starting this thread in case it may help someone in the future.When putting in forward or reverse it would return to neutral after 10-15 seconds with code epc 306061.31 which was transmission speed too low. After jd110 told which was the transmission speed sensor we replaced it and the tractor is running well again. Thank you jd110. By the way, I entered the diagnostics by holding the roll mode lever and turning the key to on but still could not access epc 14. I really would have liked to see the transmission speed to check the sensor before changing the part, but it all worked out.
 

·
Registered
Joined
·
971 Posts
Glad to hear you got it going. Accessing technician mode can be finicky. It may be you didn't actually access it. I have tried multiple times to get access sometimes. Also a possibility a software update may be required to activate certain addresses. Your friend could get his dealer to update to newest software if he wants. The BCU software and EPC software needs to be updated together, and then transmission needs recalibration as well as the hitch. He can expect to pay 2 or 3 hours labor to have it done unfortunately.
 
1 - 7 of 7 Posts
Top