Green Tractor Talk banner

1 - 4 of 4 Posts

·
Registered
Joined
·
129 Posts
Discussion Starter #1
Just get back from welder and pick up my project. TEST IT OUT ON ALL MY 3pt attachments. So far so good. Still need some grinding but I know it will fit.

Thanking about to get the quick hitch with H120 but there is nothing in the market like it. I know Artillian frame could have 3pt quick hitch adapter but I already opt out when I got my fork. I like to have one piece from JDQA to 3PT QUICK HITCH.

Ready for 3pt attachments to use with H120 as long as they are iMatch Compatible now.
 

Attachments

·
Registered
Joined
·
4,104 Posts
I did pretty much the same thing. I have the SSQA adapters on my H180 loader, so can use any skid steer attachment. Many more possibilities there. I ordered a Titan SSQA to 3pt adapter. Pretty cheap made, but works ok. Then I picked up a HF quick hitch. I already have JD iMatch for the rear, but wanted something cheap for the occasional use on the front. One of the things this works really well with is the 3pt boom pole. This gives me a really high reach.

Dave
 

·
Registered
Joined
·
129 Posts
Discussion Starter #3
Thinking about the same thing

Dave

Yes, I was thinking about to have SSQA ability at the front too. But then I made the decision to go with HF quick hitch.

Since I already have some 3pt implements and will not need to buy something else. I understand there are a lot of SSQA attachments but my little 1025r may not able to use them.

Now I could use Box Blade, 3pt Blade or rake or Boom pole at front.

I opt out the Titan 3pt Adapter and get the mounting plate instead and welded with HF quick hitch. Only want to use attachments which are quick hitch compatible. It maybe limited my selection but it will worth in the long run without the "Attaching implements Ugh"



I did pretty much the same thing. I have the SSQA adapters on my H180 loader, so can use any skid steer attachment. Many more possibilities there. I ordered a Titan SSQA to 3pt adapter. Pretty cheap made, but works ok. Then I picked up a HF quick hitch. I already have JD iMatch for the rear, but wanted something cheap for the occasional use on the front. One of the things this works really well with is the 3pt boom pole. This gives me a really high reach.

Dave
 
  • Like
Reactions: BigJim55

·
Super Moderator
Joined
·
5,203 Posts
I did pretty much the same thing. I have the SSQA adapters on my H180 loader, so can use any skid steer attachment. Many more possibilities there. I ordered a Titan SSQA to 3pt adapter. Pretty cheap made, but works ok. Then I picked up a HF quick hitch. I already have JD iMatch for the rear, but wanted something cheap for the occasional use on the front. One of the things this works really well with is the 3pt boom pole. This gives me a really high reach.

I have the Artillian adapter to use my QH on the loader for exactly the same reason. I use the boom pole on the loader more than I use it on the back end.
 
1 - 4 of 4 Posts
Top