Have you turned rate of drop valve(item 30) under seat 1/2-1 turn CCW? Does 3 pt control handle move forward in quadrant? It's possible cam follower(shaded outlined part) on 3 pt linkage inside of rockshaft housing has slipped out of control linkage or spring has broken become disconnected. How many hrs of use since hyd filter was changed & suction screen checked/cleaned?
John Deere 3050 low pressure front pump
Hi everyone!
Please help. John Deere 3050.
After connecting a pressure gauge to the front pump at idle, the pressure increases to 40-50bar only. I will add that the rockshaft is locked in the upper position and it is impossible to lower it (in the middle of the roskcdk feel resistance when moving the lever)
What can be the problem? Thank you very much!
![ikona Zweryfikowana przez społeczność]()
Please help. John Deere 3050.
After connecting a pressure gauge to the front pump at idle, the pressure increases to 40-50bar only. I will add that the rockshaft is locked in the upper position and it is impossible to lower it (in the middle of the roskcdk feel resistance when moving the lever)
What can be the problem? Thank you very much!
1 - 6 of 6 Posts
Thanks a lot Tx Jim for your reply!!!
yes i turned the screws to the left but it didn't help.
The tractor is a new purchase, it has not worked in the field yet - I replaced the filters shortly after purchase.
The 3 pt control handle is move forward in quadrant.
In the next one I check the front pump and this is what it looks like:
yes i turned the screws to the left but it didn't help.
The tractor is a new purchase, it has not worked in the field yet - I replaced the filters shortly after purchase.
The 3 pt control handle is move forward in quadrant.
In the next one I check the front pump and this is what it looks like:
Attachments
1 - 6 of 6 Posts
