Green Tractor Talk banner

1 - 7 of 7 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
I have a 5520 4wd with cab, the pto runs all the time, the levers do not have any effect on it, any ideas on what i can do or check ? Thanks
 

·
Registered
Joined
·
4,420 Posts
-Solenoid. If you have a pto switch, the pto can't run without hydraulic pressure, which is controlled by the solenoid. I'm not sure if pressure makes it run or turns it off, hopefully someone can clear that up.

-something leading up to the solenoid. Make sure that the solenoid is getting power, and that the switch is in good shape.


-if you have a pto lever, then something is disconnected. Check the linkages and make sure they move and are properly adjusted.
 

·
Registered
Joined
·
1,775 Posts
Welcome to GTT
From viewing 5520 parts catalog it appears 5520 pto is controlled by a cable which I will guess is rusty or out of adjustment. Which type trans does you tractor have as different type trans appear to have different linkages.
 
1 - 7 of 7 Posts
Top