Green Tractor Talk banner
1 - 7 of 7 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I just purchased a nice LA150 with a 54 inch mower and want to get a bagger/Power Flow. A Facebook posting for a PWRFLO 54MOW Serial Number 1M00PFCHVBM090381 stated it would work on a LA150 (and LA175), but when I called the local JD dealer they said it was for a Garden Tractor not a Lawn Tractor. Does this sound correct. I have searched online in several locations to see what bagger/Power Flow will work, but am striking out. Can anyone help? Thanks!
761853
Vehicle Car Subcompact car
 

·
Super Moderator
Joined
·
6,527 Posts
There is no powerflow for the L1xx, LA1xx, G1xx, D1xx, E1xx machines. They use a simple bagger with a direct chute between the deck and bags. I'm 95% sure that all the 1xx machines use the same bagger system. The only difference between any of them is the lower half of the chute. That part depends on the deck size.
 

·
Super Moderator
Joined
·
6,527 Posts

·
Super Moderator
Joined
·
6,527 Posts
The 1M00PFCHxxxxxxxxx serial numbers appear to cross to the Powerflow system for the 54" decks on the 325, 335, 345 and 355D garden tractors circa 1998-2006.
 

·
Registered
Joined
·
13,588 Posts
Chances are the output area of the decks are the same for either 54. I’m not one the often chooses poke and hope, but I think I’m this case I would.

Take your tractor if you can and just verify the bracket holes line up if you can.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #7 ·
The 1M00PFCHxxxxxxxxx serial numbers appear to cross to the Powerflow system for the 54" decks on the 325, 335, 345 and 355D garden tractors circa 1998-2006.
That is what the JD Dealer indicated to me. Thanks
 
1 - 7 of 7 Posts
Top