Green Tractor Talk banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
hey guys,

The lift on my 6300 wont work. I have unhooked the stepper motor and tried to make it work with the screw on top with no luck. It will act like it is trying to raise up but it is already at the top. the stepper motor is hot to the touch. I checked the fuse and it is good. I tried pushing down on the arms with my skid steer incase it was stuck... nothing. Any help would be greatly appreciated. thank you

Charles
 

·
Registered
Joined
·
4,440 Posts
Is it not going up, or not going down? If its not going down, is the rate of drop valve closed?
 
  • Like
Reactions: CharlieQuick

·
Registered
Joined
·
3 Posts
Discussion Starter #3
the lift is all the way up. when I press the button it will jerk up just a little but when I try to get it to go down, it wont do anything.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #4
So this just happened. I went out and double checked the rate of drop valve. it wasn't all the way down. I turned it down and it still wouldn't work. I unhooked the stepper motor and re ran the test. Now it works when I use the screwdriver but when I hook everything back up, it still doesn't work. I assume that means I need a new stepper motor? thank you
 
1 - 4 of 4 Posts
Top