Green Tractor Talk banner
1 - 8 of 8 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hi, first of all my English sux. Sorry for that. I have a 4100 with a front loader 410 in the garage which is not installed. I am an absolute newbie to the world of tractors. Anyone of you guys have an instruction how to connect the front loader to the 4100? Maybe with some pictures...i did not find anything on the internet. Tx in advance.

Forensic
 

·
Administrator
Joined
·
25,278 Posts
This is a really bad video, but it shows the general procedure for the 410, 420, and 430 loaders used on 4100, 4110, 4115, 4200, 4300, 4400, 4210, 4310 and 4400 loaders.

Also, the tractor should be in neutral so it can roll easily.

(all the model number given to help with searching for more video's)




Here is the online owners manual: Operator's Manual View
 

·
Registered
Joined
·
668 Posts
Of course it's the reverse of the removal procedure. First hook up the hoses. Hopefully they are marked. If not follow the lines to see what's what. Joystick pattern should be forward boom down, backward boom up, left bucket curl, right bucket dump.

What he's doing first in the video is disconnecting the latch holding the stand to the weight bracket. What he does when he climbs on is to slide the lock bar forward.

So it's hook up hoses, use joystick to lower loader arms into the mount, pull back the locking bar, put the latch on.
 

·
Administrator
Joined
·
25,278 Posts
There should be a bar under the PTO shaft with a hole in it so you can pin that trailer to it, it’s called a “drawbar”, If it’s not there, maybe the previous owner took it off. It looks similar to this:

m
783777
 

·
Administrator
Joined
·
25,278 Posts
Pic from JDParts:

783821
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top