Green Tractor Talk banner
1 - 2 of 2 Posts

· Registered
Joined
·
3,404 Posts
If the dealer has to put the tractor loader and backhoe together you will pay a cost more like what the build your own shows. If they order it as a factory TLB then you will see a significant discount because there are no dealer labor fees to factor in. Mine was 21K last year.

If you really want stability on hills. Get the 72lb start weight or 2 50lb weights on each side. Tire fluid will help also.
I have 1.4 inch spacers from bro-tek and the 72lb weights on mine and I slid sideways once down a nearly 25 degree hill and it didnt feel tipsy.
I definitely recommend spacers.

The 3rd function is about 1300 just in parts. It requires a Power beyond line kit. loader line kit, and the 3rd function kit.
You will need the PB kit even though the tractor has a PB for the backhoe. The kit has additional lines to mate up with different configurations.

783077
 
  • Like
Reactions: rtgt

· Registered
Joined
·
3,404 Posts
The dealer can order the AV20F grapple for you as well. It will likely be cheaper than any other option. It was quoted to me about $1600 last year.

Artillian has a grapple. By the time you add the fork frame, grapple sections, and shipping, you get close to $3000.00 🤯
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top