[mikealewis]

Hello, new to this forum. I've purchased JD LX176, that has been used very little and in great shape. With the fall coming, I would love to add a rear bagger to this tractor. I have been unsuccessful so far identifying the correct parts needed to complete this task. The Chute seems to be biggest question, as it appears this model did not have a "round" chute. If anyone has the correct part numbers or some good pictures that would be helpful.! Thanks

 

[x738]

A year or so ago we got a 'well used' LX176 and bagger with a property.

The chute is rectangular at bottom where it fits over discharge of deck and square where it enters the lid/cover of the bagger.

This set-up is one has does not include a powerflow unit -- seems to work fine without it.

I'll try and get a shot of it later.

 

[mikealewis]

Thanks, The pictures would be great! I do not really want to use a power flow unit, in my experience High Lift blades will move the grass (unless its wet!!).. Thanks!

 

[x738]

Sorry about the delay.
Chute

Connection detail and installed set-up (I left the bags off)

Offset mounting bracket, brace that fits it and holds bag frame