Green Tractor Talk banner

LX 176 - Correct Rear Bagger Set-up

653 Views 3 Replies 2 Participants Last post by  x738
Hello, new to this forum. I've purchased JD LX176, that has been used very little and in great shape. With the fall coming, I would love to add a rear bagger to this tractor. I have been unsuccessful so far identifying the correct parts needed to complete this task. The Chute seems to be biggest question, as it appears this model did not have a "round" chute. If anyone has the correct part numbers or some good pictures that would be helpful.! Thanks
1 - 2 of 2 Posts
A year or so ago we got a 'well used' LX176 and bagger with a property.

The chute is rectangular at bottom where it fits over discharge of deck and square where it enters the lid/cover of the bagger.

This set-up is one has does not include a powerflow unit -- seems to work fine without it.

I'll try and get a shot of it later.
Sorry about the delay.
Tire Automotive tire Tread Grass Wheel

Connection detail and installed set-up (I left the bags off)
Tire Wheel Plant Automotive tire Tread

Offset mounting bracket, brace that fits it and holds bag frame
Tire Wheel Vehicle Automotive tire Tread
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.