Joined
·
36 Posts
Is there a manual engine shutdown for the 2032R/2038R (either a dedicated lever or a solenoid that can be hand triggered to shut down the engine)?
Last night my Kubota BX would not shut off with the key or by deliberately triggering the seat safety switch (probably a blown fuse from what I've read but we'll see). After some panicked googling I found that there is a manual shutoff lever on the side of the block. Easy as could be once you know it's there.
So naturally I wondered if there was such a thing for our large 2Rs (planning ahead in case it happens on that machine too.)
Last night my Kubota BX would not shut off with the key or by deliberately triggering the seat safety switch (probably a blown fuse from what I've read but we'll see). After some panicked googling I found that there is a manual shutoff lever on the side of the block. Easy as could be once you know it's there.
So naturally I wondered if there was such a thing for our large 2Rs (planning ahead in case it happens on that machine too.)
