Green Tractor Talk banner

Missing Zerk Fitting 2020 JD 1023E

1565 Views 12 Replies 7 Participants Last post by  Mad_River
Just wanted to make sure others buying the 1023 or 1026 check this. I wanted to hit my zerk fittings on the drive shafts with some JD multi-purpose grease even though I only have 38 hrs, but I can’t quite get it done since the CV joint closest to the engine (the hard to get at one) is missing it’s zerk fitting. It looks like it just backed off and is clean inside, so hopefully I can figure out the size and get it up in there to screw it on without cross threading it or contaminating the bearings. I am debating waiting until winter and sending the whole tractor to the dealer for this, the intermittent warning light on the dash relating to the reverse pedal wiring code 523591 code 14, and broken weld on the air filter support bracket, and the MMM level (if I cannot get it right). No JD Power Initial Quality Award for JD so far.

Eye Automotive lighting Hood Automotive tire Bumper
1 - 1 of 1 Posts
You can order a miscellaneous grease nipple kit on amazon for cheap!
Something in the box is bound to fit and you have spares.
Im not sure if its gonna be metric or SAE threads but you can get a mixed box.

https://www.amazon.com/Taxutor-Fitt...9Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

Rectangle Font Screenshot Art Number
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top