Green Tractor Talk banner

1 - 4 of 4 Posts

·
Registered
Joined
·
80 Posts
Discussion Starter #1
My 62d mower deck yokes were off center, got tired of looking at them so I went to tractor supply and purchased some cat 0 3point pins and collers.
I did not have any before pictures , they were off about 3/4" . pic00070.jpg
 

·
Premium Member
Joined
·
6,593 Posts
My guess is that there is something that is not quite assembled correctly. Or you have a wrong spacer. I can try and dig into this further if you like?
 

·
Premium Member
Joined
·
6,593 Posts
Design Change

This one was bothering me and it looks like there was a design change. Here are the diagrams to that show the the old versus new. The designs are quite different. Any chance you got a combination of the two?
 

Attachments

·
Registered
Joined
·
80 Posts
Discussion Starter #4
I have the MP41996 parts , they all seem to be there but when you look straight from the rear the linkage is cocked about 1/2" to 3/4" in on each side
pic00046.jpg
 
1 - 4 of 4 Posts
Top