Hello everybody, I was wondering how to disable the "no reverse while mowing" feature. All the methods I have seen on youtube are just disconnecting the RIO switch and jumping the wiring harness with a piece of cable. However, The LT190 doesn't have a Rio button, so it doesn't even give you the option to press a button in order to go in reverse. So I'm thinking of just bypassing the system but I'm not sure what needs to be done. Any help is appreciated.
Mowing in reverse with John deere LT190 ?
1 - 3 of 3 Posts
Joined
·
5,065 Posts
Sounds like the best way to disable it would be to find the switch on the reverse pedal and disable it.
Joined
·
6 Posts
Im not sure if its going to be the same - but on my LT160 it had two plugs running into the back side of the reverse bypass button on the dash. I unplugged them and put a jumper wire between the two plugs and it worked fine. Then if you every want it hooked back up if you are selling it or something its just plug back in and go.
1 - 3 of 3 Posts
