Green Tractor Talk banner

new 1025r - filled wheels & spacers

1459 Views 7 Replies 7 Participants Last post by  W9GFO
I just purchased a 1025r (Loader & backhoe) but will not be delivered for about 1 week. I live in a hilly area and was thinking of putting wheel spacers in. I would also like to fill my tires. My question is - should I have the dealer fill the tires with rim guard, then try and install the wheel spacers myself with heavy tires, or just buy the rim guard and try and fill the tires myself after I put on the spacers. I don't have a trailer so taking it back to the dealer to fill the tires is not a good option.

I hope to have very little/no time going sideways on the hills - only up and down but at a fairly steep angle. I cut my grass with a x590. I want to keep the backhoe on when going up and down the hills.
1 - 1 of 1 Posts
I did spacers with filled tires
On 1 series not to bad
On 3 series much harder and had to use alignment studs to help set wheel
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top