Green Tractor Talk banner
21 - 25 of 25 Posts

·
Registered
Joined
·
641 Posts
It's hard to get a picture of, but one word of advice:
add a shut off valve in between the tank and the pump. On my 25 gallon Fimco set up there wasn't one stock, and the sediment clogged up the screen after three or so tanks. When you see the spray pattern getting weak, or the pump working harder than it should you can close the valve, disconnect the hose, & clean the screen out without having to empty the tank.
 

·
Registered
Joined
·
167 Posts
I like that boom, first one I had and still use it today to spray grape vines, shut the center off and point to outers up and it covers nicely.
 

·
Registered
Joined
·
641 Posts
I kept forgetting to get a picture:

790930

790931
 

·
Registered
Joined
·
167 Posts
I have this tank mounted up front on my UTV for better weight distribution and I always seem to have trouble with the fittings from tank to pump. I finally eliminated everything but the cap to tighten and so far so good, I don't need to worry about the screen since it's just a transfer tank for the rear.
 
21 - 25 of 25 Posts
Top