Your correct about what is already there. That's a 4th/5th SCV on the right and there should be a green rocker switch in the cab that activates the diverter valve. The extra connections in the middle are a Power Beyond kit for a backhoe. Similar setup to mine, but I have a 3rd SCV so the PBY is hooked directly into the valve body for the 3rd eliminating the extra bracket.
Keep in mind that if you decide to add the 3rd SCV later, that Power Beyond won't work with it. It'll have to be removed and a different kit installed that does work with the 3rd. :bang head: My dealer discovered that when they installed mine. They put the stand alone PBY on then realized that it isn't compatible with the 3rd SCV.
Not so sure about that? Many machines have both the 3rd functions and PB installed.
That's why I wasn't sure what it was, the Power Beyonds that I've seen previously looked like this one below:
Nailed it. That's the one I have. It only has to tie into the 3rd SCV because the fluid flow has already been routed up to the back by the plumbing for the SCV.
They can have both. Mine does. But there are two totally different kits depending on whether or not the tractor already has a 3rd SCV. This was one of those issues I was referring to in my other thread. Dealer tried to install the 3rd SCV after they had already installed the standalone PBY and those two kits absolutely will not work together. The PBY kit for use with a 3rd is just the extra quick connects and a couple of hoses because it doesn't have to be plumbed all the way to the pump. The 3rd already did that part.
