Green Tractor Talk banner
1 - 20 of 25 Posts

Senior GTT Super Slacker
Joined
46,388 Posts
Discussion Starter · #1 ·
Mine broke yesterday, #43, PN# M173658...

782143

I'll probably buy 2 as they are only $1.00. I've NEVER seen ANYTHING from John Deere that cost a $1.00 馃ぃ
Hand Sleeve Grey Wood Automotive design
Eyelash Wood Smile Art Font
 

Hollywood Pat
Joined
17,696 Posts

Hollywood Pat
Joined
17,696 Posts
Parts guy said it looks to be a .25 cent part. :LOL:
Good to know they didn't make a mistake, that's still their normal markup. :ROFLMAO:
 

Premium Member
Joined
10,277 Posts
Two in stock, they must break a lot.
The Parts guy said it looks like a $0.25 part, but is that what he charged you?
 

Senior GTT Super Slacker
Joined
46,388 Posts
Discussion Starter · #8 ·

Old Pa-pa
Joined
15,701 Posts
I'll probably buy 2 as they are only $1.00. I've NEVER seen ANYTHING from John Deere that cost a $1.00 馃ぃ
Ya shouldn't have said nothing, Ma Deere sees this and she'll send an emergency priority alert
out from cooperate HQ to jack the price to $25 before ya get there.:rolleyes:
 

Premium Member
Joined
14,721 Posts
I'll probably buy 2 as they are only $1.00. I've NEVER seen ANYTHING from John Deere that cost a $1.00 馃ぃ
Pinto part. Pinto price.


jack the price to $25 before ya get there.
Naw. That is already what the same part would cost for a Lincoln or Caddy.

For a Buick it's probably $2.50.
 

Old Pa-pa
Joined
15,701 Posts
Pinto part. Pinto price.




Naw. That is already what the same part would cost for a Lincoln or Caddy.

For a Buick it's probably $2.50.
Wouldn't have broke on a Caddy or Lincoln and only bent a little on the Buick............:ROFLMAO:
 

Premium Member
Joined
14,721 Posts
Wouldn't have broke on a Caddy or Lincoln and only bent a little on the Buick............:ROFLMAO:
You just keep on believing that line of
782198
.

Best raise your ground sucking air intake a bit higher if you're gonna pile manure that deep.
 

Old Pa-pa
Joined
15,701 Posts
You just keep on believing that line of View attachment 782198 .

Best raise your ground sucking air intake a bit higher if you're gonna pile manure that deep.
I'll have you know that I was told the springs for the Caddy and Lincoln are made of the
finest Swiss steel by Swiss watch makers, the Buick springs are made by their apprentice.(y)

The springs for the Pinto Gators are made by two guys in a lean to shed behind their
garage when they're on work release.:rolleyes:
 

Senior GTT Super Slacker
Joined
46,388 Posts
Discussion Starter · #15 ·
I went out and it was the wrong part, more like I picked the wrong part. It's # 34. and they did not have one plus the new part is $1.73.

782229
 

Old Pa-pa
Joined
15,701 Posts

Premium Member
Joined
10,277 Posts
I went out and it was the wrong part, more like I picked the wrong part. It's # 34. and they did not have one plus the new part is $1.73.

View attachment 782229
馃 馃It's probably the one two places to the right of Key 27 that you can't buy separately and have to buy Key 32 to get :unsure:馃
 

Senior GTT Super Slacker
Joined
46,388 Posts
Discussion Starter · #18 ·
馃 馃It's probably the one two places to the right of Key 27 that you can't buy separately and have to buy Key 32 to get :unsure:馃
That would be correct about buying the whole pedal assemble (#32) for $149 to get that one little spring.
Lucky for me that is not the one I need. (y)
 
  • Like
Reactions: Herminator and rtgt

Premium Member
Joined
14,721 Posts
The springs for the Pinto Gators are made by two guys in a lean to shed behind their
garage when they're on work release.
The 2 fabricators must be back in "The Joint".
So who do we need to call and petition for your release?

Gizmo needs a spring, so it sounds like we gotta spring you.

What are ya in for this time anyway?
 
1 - 20 of 25 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top