Green Tractor Talk banner

1 - 3 of 3 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter #1
I'm looking for the outlet cover for my 2010 hydraulic system for running system to a loader. It is not a 36A but the part I need is listed in the 36A loader manual. The part number is C 14656 C. I have tried a bunch of places but can't find one. Any suggestions would be helpful. If this request should be in another part of the site please let me know. can just call me 309-945-7126
 

·
Premium Member
Joined
·
7,508 Posts
Can your cover be drilled and tapped?

I heard serial number 29,000 and up have 3/8" plugs at the bottom of the valve that can be used for hydraulics pressure and return.

TxJim probably knows more about these than I do.
 

·
Registered
Joined
·
13 Posts
Discussion Starter #3
There is hydraulic system hooker up now. The problem is this way you have to use the levers under the steering wheel. I need the cover in order to put a independent or remote valve on the loader to move the control to the right side and on the loader. The part came with the 36A loaders and are only listed in the 36A manuals. So the only tractors (in this case a 2010) that would have the part on it is one that had a loader on it at one time.
 
1 - 3 of 3 Posts
Top