Green Tractor Talk banner

1 - 4 of 4 Posts

·
Registered
Joined
·
126 Posts
Discussion Starter #1
It's been a busy summer to say the least. I finally got some time last night to install my Piranha Tooth Bar and immediately put it to work. Pretty happy thus far. Only spent about an hour clearing a section of my woods to make a turn around for my driveway. Seems to get the job done for sure.

JD Piranha Tooth Bar.jpg

JD Piranha work.jpg
 

·
Registered
Joined
·
2,750 Posts
Yep, i love mine as well. Gives you a good amount of breakout with serrations, yet doesn't leave a bunch of tooth scars.
 

·
Registered
Joined
·
8,197 Posts
I have had a Piranha tooth bucket edge bar since I purchased my tractor. Works very well. Very glad I have it and I strongly endorse it. It's wonderful for shearing off small brush and vines, etc. when working with the tractor.

I do suggest buying a length of the "pool noodle" or something similar for placing over the edge of the bucket when the loader is off or when you park the tractor where you could bump into the edge with your foot or even your pets walking past.

The edge is wickedly painful to scrape against with your foot, etc. I park my tractor in one of our main garage stalls and we frequently walk past it. I scraped my ankle against the front edge once and I won't want it to happen to anyone else.

Its easy to not have the bucket completely flat when you set it down and having the bar on the bucket front lip tends to leave the front edge up about 1" or 2" when the tractor is parked. I slide this noodle over the bucket edge because it will take a hunk out of your ankle, foot, etc. simply bumping into it.

That is the ONLY downside to having one. They are tough as can be and the more you use it, the sharper it seems to get. Just be careful when walking around the bucket once its installed as it can and will bite you. :good2:
 
1 - 4 of 4 Posts
Top