Green Tractor Talk banner

1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Posted this on attachments forum with no replies. Seems like guys on this page have more larger equipment experience.

Need to replace discs on a PK-03 and don't know if the gang bolt is round or square. Anybody know which it is? Easy answer is to take it apart and see, but I'm currently using it and don't need to take it apart until new discs come. Not to mention it is a pain in the rear to get apart. Only want to do it once.
Parts catalog looks like its round, but previous owner thinks its square. Would like to be sure before I order 20 discs and would hate to have pay return shipping. Parts guy at local dealership wasn't sure either. Parts catalog does not give specifications. Called John Deere direct and no one could pull up specs on that part number.


Also would like to know if anyone has recommendation on disc supplier.
 

·
Chief Stick-picker-upper
Joined
·
11,779 Posts
don't know if the gang bolt is round or square.
Best to my recolection, they are square.





Anybody know which it is? Easy answer is to take it apart and see, but I'm currently using it and don't need to take it apart until new discs come. Not to mention it is a pain in the rear to get apart. Only want to do it once.
Parts catalog looks like its round, but previous owner thinks its square. Would like to be sure before I order 20 discs and would hate to have pay return shipping. Parts guy at local dealership wasn't sure either. Parts catalog does not give specifications. Called John Deere direct and no one could pull up specs on that part number.

They're most likely too young to know, and I'm too old to remember.


Also would like to know if anyone has recommendation on disc supplier.
I believe the PK was available with two options of disc size, 24" and 26".
Plain, Cone, or Cut-out(notched).

Try Agri Supply, or Shoup
 

·
Registered
Joined
·
4 Posts
Discussion Starter #3
Finally

Finally I was able to find a John Deere tillage brochure that had 1 of the 10-12 disc part numbers on it with hole dimensions. It is 1 1/2 round. Now of to spend $$$$$$$$!
 
1 - 3 of 3 Posts
Top