[Darryle]

I currently have a 2012 3032e/305 FEL with 210hrs and a ton of implements. Considering the 3046r with a I-match, FEL and R1s. I cannot find the overall width of the 3046r online. I want to upgrade, but I don't want to have to replace the majority of implements. I would replace the 5' Frontier mower with the JD HX6 mower, but that would be about the extent I am willing to go. If I have to replace the majority of the implements, I would just go up to the 5 series and a cab.

I wasted all that typing to ask, what's the overall width of the 3046r and can I use the majority of my current equipment.

Thanks Darryle

 

[farmer52]

According to the OM the width is 69.1". Easily found by going to JD Tech Info Store.

Operator's Manual View

Operator's Manual View

techinfo-omview.apps-prod-vpn.us.e06.c01.johndeerecloud.com

 

[quackaddict]

No way those machines are 6' wide. They are 5' at best.

 

[DBCSteve]

I have a 3046r with R1 tires. I’ll go out and measure later this morning and post results.

 

[rtgt]

My 3039R with R4's is just under 60". My 60" rotary cutter mows just outside of the tire tracks.

Can't help with R1's, but they shouldn't be any wider.

 

[DBCSteve]

58 inches edge to edge on my 3046r with R1’s.

 

[Darryle]

That was the reason I asked, because of the conflicting information. I am headed to the dealer this after noon and check them out.