Green Tractor Talk banner

1 - 8 of 8 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I was wondering if anyone knows where I could source a power beyond type kit for a 3025e? The dealer only lists rear SCV setup. Thanks for any help.
 

·
Super Moderator
Joined
·
4,838 Posts
Deere doesn't make a PB kit for the 3025e so you'd have to piece the entire thing together yourself. I've never seen any complete after-market PB kits for a Deere machine so I don't know of any sources.
 

·
Registered
Joined
·
1,567 Posts
There may not be one listed yet, but there has to be something, since the 3025E is now backhoe compatible.
It could just be a while before they list the correct parts, and before the dealer gets that info.
I dont see it on the site, and the brochure listed is the old one.
 

·
Super Moderator
Joined
·
4,838 Posts
There may not be one listed yet, but there has to be something, since the 3025E is now backhoe compatible.
It could just be a while before they list the correct parts, and before the dealer gets that info.
I dont see it on the site, and the brochure listed is the old one.
Or the backhoe for the 3025e has it's own hydro pack that runs off the rear PTO...

There isn't anything I see on the Deere site that mentions anything about a backhoe for the 3025e. It isn't listed as an available attachment on the "Build Your Own" page and the 3-series brochure only shows the 3R machines as backhoe compatible. No listing for any Power Beyond setup in JDParts either.

I found several 3025e units with backhoes via Google but they all have the Woods backhoe which has it's own hydro pack. They're all like this one:

2018 John Deere 3025E backhoe - Compact Utility Tractors - John Deere MachineFinder
 

·
Super Moderator
Joined
·
4,838 Posts
Ok, I'm going to modify that. It looks like there are 2 ways of using the Woods BH. One is with it's own hydro pack. But this other thread shows a parts kits for a Power Beyond loop. The image of the instructions has a part number on it that the OP's dealer may be able to look up!

Woods BH75 backhoe on 3025e has arrived......review/report to follow - Page 2

Apparently that kit is from Woods. That 1045949 part number is the Woods part number for the hose kit. It isn't a Deere part.
 

·
Registered
Joined
·
1,567 Posts
As I mentioned, this is new, not currently existing with the 3025E.
It will use the 370B.
See here for pictures that may show how its hooked up:
2018 John Deere 3025E TLB w/ GRAPPLE - Compact Utility Tractors - John Deere MachineFinder

See here for discussion regarding this as well:
Considering a JD 3025E or MF 1726E

I read some time back about this happening. As I recall, they hinted that it may be a TLB option from Deere, which indicates it likely wouldnt be a PTO pump driven option. The hoses and fitting would certainly be cheaper than the pump and associated hardware...especially if Deere will indeed be offering the TLB in the near future.
 

·
Premium Member
Joined
·
1,603 Posts
Deere doesn't make a PB kit for the 3025e so you'd have to piece the entire thing together yourself. I've never seen any complete after-market PB kits for a Deere machine so I don't know of any sources.

Backhoes | 370B Backhoe | John Deere US

OMLVU34994

There will be a Power Beyond Kit for the 3E series

Dealer May not be able to order it Yet as I bet Deere hasn't released the Kit for sale Yet But the 370B will be run by a Power beyond kit:bigthumb:
 

Attachments

1 - 8 of 8 Posts
Top