Green Tractor Talk banner

1 - 6 of 6 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
will a power flo bg20747 fit on a saber 2001= 2554 54 inch deck or what numbers will work only worried about deck and pulley situation, cant seem to find old part numbers or if one was made
 

·
Registered
Joined
·
3,944 Posts
Is it the 54" deck with the metal belt guards. Many of the Saber,Scotts and JD decks were the same just painted different colors.
 

·
Registered
Joined
·
3,944 Posts
Numbers are on the discharge side top of the deck. Dose deck look similar to this one. Go to post # 8.
 

·
Registered
Joined
·
1 Posts
Numbers are on the discharge side top of the deck. Dose deck look similar to this one. Go to post # 8.
will a power flo bg20747 fit on a saber 2001= 2554 54 inch deck or what numbers will work only worried about deck and pulley situation, cant seem to find old part numbers or if one was made

Is this an accurate photo of your deck?

The two holes near the edge of the deck opening towards the rear are the mounting holes for the bracket that holds the blower on.
See part 6 on this page. This is the parts used on the 335 tractor

You will also need part #10, Be sure to check that this is the right pulley. I checked the spindle part numbers but there appear to be several 54" decks used.in the 325/335/345 machines.

Good luck and keep us posted

Dave
 
1 - 6 of 6 Posts
Top