Hi every one. I have a question ive been stumped on for awhile and the local deere shops are no help.. I cant figure out where the lines go in the steering valve. Its a 1999 445 JD there is 5 holes the fittings are held onto the steering valve with a plate. But i want to make sure im putting the hoses to the proper holes. and the 5th hole is this a second return line? Im going to try and post a picture of it. If some one had a good picture of one hooked up or a diagram this would be great help. There are 5 letters in the corner i bieleve are associated with the holes but not sure what they mean there in the corner. 5 letters.. Thanks for any help.
324.9 KB Views: 46