[Firewood Bandit]

Good start, turn the heat and give her a hot supper.

 

[Firewood Bandit]

There ya go, these welds look a ton better. If the mill scale was removed the spatter would probably be less too.

Nozzle jel won't make build up stop, but it will make it come loose much easier. MIG pliers can be used to clean but I like this gizmo and it is cheap.

https://www.amazon.com/KVAEY-MIG-No...&keywords=mig+nozzle+cleaner&qid=1748122936&sprefix=mig+nozzle+c,aps,110&sr=8-5