Started the install of some NiLights on my 20205R today.
Decided for the read facing lights I would use the hardware that comes with the lights and take advantage of the upper hazard light assembly bolt on the lower ROPS bar. Removed the bolt and attached the light bracket using the same bolt.
View attachment 768419
![768417]( "768417")
![768422]( "768422")
![768423]( "768423")
Turned the focus to installing the front facing lights. debated installing them on top of the hazard light assembly by making a hole on top and bolting the bracket to the plastic assembly. decided not strong enough and a little hokie looking. turned my attention to the upper half of the lower ROPS, between the yellow hazard and the elbow of the ROPS. There is a nice through hole on the drivers side but not on the passenger. No go on that idea.
Decision = Kenny's ROPS clamps. time to place an order. Can someone tell my lazy football watching self which clamps i need for my 2020 2025r? Thanks in advance.
I'll add to this post once i get the clamps and start on the forward facing lights and wiring. I'm still debating a seperate circuit for these lights. i know the connector is already wired to the headlight switch, but i like a challenge and would maybe like to have a separate switch to play with..... thoughts??
Decided for the read facing lights I would use the hardware that comes with the lights and take advantage of the upper hazard light assembly bolt on the lower ROPS bar. Removed the bolt and attached the light bracket using the same bolt.
View attachment 768419
Turned the focus to installing the front facing lights. debated installing them on top of the hazard light assembly by making a hole on top and bolting the bracket to the plastic assembly. decided not strong enough and a little hokie looking. turned my attention to the upper half of the lower ROPS, between the yellow hazard and the elbow of the ROPS. There is a nice through hole on the drivers side but not on the passenger. No go on that idea.
Decision = Kenny's ROPS clamps. time to place an order. Can someone tell my lazy football watching self which clamps i need for my 2020 2025r? Thanks in advance.
I'll add to this post once i get the clamps and start on the forward facing lights and wiring. I'm still debating a seperate circuit for these lights. i know the connector is already wired to the headlight switch, but i like a challenge and would maybe like to have a separate switch to play with..... thoughts??
