Quick Hitch Clearance

677 Views 13 Replies 6 Participants Last post by Jeff is outside, 11 d ago

Jeff is outside

Discussion Starter · 15 d ago

Can anyone please tell me the the dimension from the center of bushing to the back of the hook, at the top link and bottom links (see marked-up photo below)? I'm looking to make the Universal Implement Frame that I am developing quick-hitch compatible.

They all are slightly different so if you could, please state which brand you measured also.

Thank you very much!

See less See more

Save

1 - 14 of 14 Posts

Kennyd

· #2 · 15 d ago

Here are a ASAE Category 1 Standard S278.6 standards

iMatch™ Quick-Hitch (option)

Save

Jeff is outside

Discussion Starter · #3 · 14 d ago

@Kennyd Ah, thank you Kenny! This is great info. However, I don't see that it has the dimensions I'm after; I'm looking for the clearance from the bushing to the back of the quick hitch hooks, so that what I'm making doesn't interfere with hookup.

Save

MTACRES

· #4 · 14 d ago

I'll try pull the dimension off my iMatch you are looking for tonight.... otherwise try looking at the local harbor freight or fleet / farm store!

Save

Reactions: 1

MTACRES

· #5 · 14 d ago

My friend Google helped my find this..... near bottom of page select "dimensions" tab. Link WOQH-101 - Beaver Valley Supply - Worksaver CAT I Quick Hitch | Up To 50 HP | Includes (1) Bushing Set & (1) Adapter Bracket

Save

Reactions: 1

Jeff is outside

Discussion Starter · #6 · 14 d ago

MTACRES said:
My friend Google helped my find this..... near bottom of page select "dimensions" tab. Link WOQH-101 - Beaver Valley Supply - Worksaver CAT I Quick Hitch | Up To 50 HP | Includes (1) Bushing Set & (1) Adapter Bracket

Excellent, that one gives 2" clearance for the bottom hook, thanks (I did do some googling and searched here as well and hadn't found much, also it appears they are slightly different from manufacturer to manufacturer).

Save

Dog Doctor

· #7 · 14 d ago

I've got a Speeco like the orange one in the photo you marked, I can measure it tonight for you.

Save

Reactions: 1

Jeff is outside

Discussion Starter · #8 · 14 d ago

Dog Doctor said:
I've got a Speeco like the orange one in the photo you marked, I can measure it tonight for you.

Thank you!

Save

Dog Doctor

· #9 · 13 d ago

Jeff is outside said:
Thank you!

Top link 1 & 7/8” center to trailing edge of link
Bottom link 2” center to trailing edge of link

For the SpeeCo keep in mind this is a “category one ready” quick hitch. No bushings are required.

See less See more

Save

Reactions: 2

Jeff is outside

Discussion Starter · #10 · 13 d ago

@Dog Doctor thank you very much! That's exactly what I need.

Save

Reactions: 1

Matt_Attach

· #11 · 13 d ago

@Jeff is outside
Interested in what you are developing.

Save

Reactions: 2

Kennyd

· #12 · 13 d ago

Matt_Attach said:
@Jeff is outside
Interested in what you are developing.

A Universal Implement Frame

Hey all. Hope everyone had a merry Christmas and happy new years. I have been busy working on an exciting project that I want to share. Over the years I have found a few challenges to owning implements, namely: Space: Implements hog up a lot. They also take up a lot of space on a trailer...

www.greentractortalk.com

Save

Reactions: 2

Jimmy Walker

· #13 · 11 d ago

Is this one of the measurements you wanted? 45mm on imatch

See less See more

Save

Reactions: 1

Jeff is outside

Discussion Starter · #14 · 11 d ago

Yes! Thanks Jimmy. I'm assuming that's John Deere's

Save

Reactions: 1

1 - 14 of 14 Posts

Top Contributors this Month