Green Tractor Talk banner

1 - 3 of 3 Posts

·
Registered
Joined
·
338 Posts
Discussion Starter #1
I was wondering if anyone has made a separate valve to plug into the power beyond kit to act as a 3rd function. I would assume using an open center valve like the loader or backhoe valve would be fine. Just curious.

Thanks

Adam
 

·
Registered
Joined
·
558 Posts
From the research I've done on the PB kit, I think you want a tandem center valve. Something that will let fluid flow with the valve in the center position. If deere pushes out the ship date on the BLV11143 kit for the 1 series again, I'm thinking of building something based on one of these-
https://summit-hydraulics.com/product/hydraulic-monoblock-solenoid-control-valve-2-spool-13-gpm-12v-dc/

The 2 spool would let me leave the hydraulic mower lift connected and use the second for a grapple on the FEL or to angle a plow blade.

I may use the 3 spool that way I can use one for the mower deck or 3rd function to angle a FEL snow blade and still have 2 for chute direction and deflector angle control if I ever decide to add a 3ph snowblower.
 
1 - 3 of 3 Posts
Top