Green Tractor Talk banner

1 - 4 of 4 Posts

·
Registered
Joined
·
84 Posts
Discussion Starter #1
So I have been evaluating my options to power my old electric sprayer I used on my 1series tractor with the new 3039r cab. On the 1026, I added a 7pin trailer plug and used the power terminal to power the pump. Could I simply add the 7pin kit for the 3039 and power this up? I had trouble using a lighter plug on the 1026, it pulled too much power for that type of plug.

Is LVA19507 the correct part for the cab?

Thanks!!
 

·
Registered
Joined
·
125 Posts
So I have been evaluating my options to power my old electric sprayer I used on my 1series tractor with the new 3039r cab. On the 1026, I added a 7pin trailer plug and used the power terminal to power the pump. Could I simply add the 7pin kit for the 3039 and power this up? I had trouble using a lighter plug on the 1026, it pulled too much power for that type of plug.

Is LVA19507 the correct part for the cab?

Thanks!!
depends on the sprayer pump current draw. what fuse size is-on the wire for the 7 connector? (i just checked my 3046r techmanual. looks like 20 amp fuse) B325F8E6-3BB1-4C1F-9D89-C0049E6D4F92.png

i just built a sprayer with an everflow 5.5 pump that draws 17 amps. i put in a direct (fused 20) circuit on the kubota rtvx direct from battery with powerpole connectors.
 

·
Registered
Joined
·
84 Posts
Discussion Starter #3
I believe 20 amps will run it fine. Thank you.

Does anyone know if the cab part number is the same as open station?
 

·
Registered
Joined
·
125 Posts
harness may be sn specific

for my 2014 3046r, the harness is pn BLV11095 (cab version)
 
1 - 4 of 4 Posts
Top