Green Tractor Talk banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
This is my first post and am an inexperienced tractor owner, so please accept my apologies in advance for any incorrect terms or poor description. Feel free to correct me.

My issue is that the rockshaft control lever on my 2015 John Deere 3032e isn't activating the lift arms until that last couple of inches of the range (highest setting). It then lifts (slower than it used to) only to the highest position such that it is either all the way up or all the way down. Moving it forward a tiny amount, causes the implement (box blade) to drop all the way down.

In the past the rockshaft control lever raised/lowered the implement smoothly/evenly throughout the range. The loader is functioning fine. I'd appreciate any troubleshooting advice anyone can provide.
 

·
Registered
Joined
·
600 Posts
Not sure if the 3 series has draft control but it sounds like you may have the draft control partially engaged.
 
1 - 2 of 2 Posts
Top