Green Tractor Talk banner
1 - 1 of 1 Posts

·
Registered
Joined
·
425 Posts
Hi All, older post but I’ve got a quick and easy solution. I fitted a short scrap of rubber pinch weld to one side of the tube at the join, so if compresses when the ROPS are up. Like the pool noodle it stops rattle and means you can still move it to line up the pins.
I never operate with the ROPS down, but I didn’t like the unnerving feel of heavy loose stuff thru the floor plate. Once I found it to be the rops I was much happier, it felt like a cracked chassis… eek 😬
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top