Green Tractor Talk banner

1 - 5 of 5 Posts

·
Corndog Hater
Joined
·
11,106 Posts
I ran my 48’ KingKutter tiller from TSC on my X728....with no problems and good results. I did have to cut down the driveshaft though.
 

·
Registered
Joined
·
3,829 Posts
Quite a few,Landpride makes a reverse tine even.
 

·
Registered
Joined
·
1,303 Posts
What are my options for a 3point, PTO driven rototillers for a JD X485?
Is your three point a CAT 0 or CAT 1? Tractor Data list them as CAT O or Limited CAT 1.

I would think any 4 foot tiller would work so long as it's not heavier than what your three point can lift and is a CAT 0 or CAT 1. You will have more selection if your three point is set up as a CAT 1.
 
1 - 5 of 5 Posts
Top