Green Tractor Talk banner

SAE Hydraulic Connector Standards

16037 Views 4 Replies 4 Participants Last post by  gotdeeres
Seems like I am continually looking up details for hydraulic connectors. So..... I compiled this information for my personal use. I thought others may also be interested in this information.


The attached Word file contains the SAE standards for NPT, JIC 37, SAE 45, O-Ring Boss,O-Ring Face Seal and Flare Less type fittings. John Deere uses these types of connectors and a few more less common ones.

View attachment SAE Hydraulic Fitting Standards.doc

GotDeeres
  • Like
Reactions: 4
1 - 5 of 5 Posts
Nice job GotDeere's, good to have all the info in one document!:thumbup1gif:
  • Like
Reactions: 1
GD,

:thumbup1gif::thumbup1gif:

If there are no objections, I am going to convert this to a PDF and post it in the Technical Library.
GD,

:thumbup1gif::thumbup1gif:

If there are no objections, I am going to convert this to a PDF and post it in the Technical Library.
I was going to do the same thing and attach it; but Randy beat me to it.
RandyM,

I originally suggested to Kenny to put it in the Technical Forum. He suggested the Hydraulic Forum which made a lot of sense. I agree that it should be in both forums since there are many questions about the topic. I use this information to cross-reference JD parts to less expensive substitutes.

GotDeeres
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top