Green Tractor Talk banner

Scotts S2546

4291 Views 8 Replies 3 Participants Last post by  kjung17
Am I correct that there's no attachments for John Deere/Scotts S2546? I was looking a mulching cover and mulching blades.
1 - 9 of 9 Posts
Assuming you have the 46" deck. I do not find any mulching kit for that machine. I tried to cross reference the deck to other models with no luck. The system will give me part numbers, but they are returned as invalid numbers. You could, still, add mulching blades. The more aggressive air foil would rob some horsepower, as would high lift blades.
See less See more
Assuming you have the 46" deck. I do not find any mulching kit for that machine. I tried to cross reference the deck to other models with no luck. The system will give me part numbers, but they are returned as invalid numbers. You could, still, add mulching blades. The more aggressive air foil would rob some horsepower, as would high lift blades.
Yes I have the 46in deck.
See less See more
I did spot 'mulching blades' in its parts list but no cover.
I wonder what john deere model the scotts 2546 is same as. Maybe can find under a actual deere model. The deck opening is 5in tall by 13in-13 1/4in wide.
I did a "where used" search on the deck shell and got no results. That deck must have been unique to that mower.

sent from my cell via tapatalk
I did spot 'mulching blades' in its parts list but no cover.
Do you know the part number for the mulching blades? Maybe I'll just make the make the cover and use 2 bolts and 2 wingnut to hold it on the deck after drilling a hole on each side.
Here's the part number for the mulching blades M119232. Which are used on the LT166 46in deck that does have a mulching kit. Do you think a the LT166 46 mulch kit will fit or can make fit on the Scotts S2546?
While the decks have different part numbers, they have a very similar shape. The discharge chute is the same part number. The LT166 kit may work.

sent from my cell via tapatalk
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top