[MeagerHair]

Popped my 60D off today since it is time for a blade touch up and grease the spindles. Lifted it with the LoadnGo and saw something fall. It was the male quick connect adapter off the gear box. looks like the set screw fell out. I looked with a light and could not find it, seems like it could not have fallen clear until after I uncoupled. We’ll look up and order or detour through the dealer To get a set screw. My guess is an extra 3 miles on the way home will work to hit the dealer will be better than shipping costs. I had put it part way back on before the picture. I think a little non permanent Loctite is in order for the new one.

 

[kylew]

There's 2 set screws, and blue loc-tite has been recommended many times.

 

[flyweight]

Part Number 22M7166
Qty Req. 2

Remarks
M8 X 8

 

[MeagerHair]

Thanks Kylew I missed the blue Loctite discussions. I do check all of the of the other nuts on the tractor side every time before I put the deck on. I have read a few of those horror stories where the shaft comes loose.

Thanks for the part number flyweight.

 

[kylew]

I forgot. There's a woodruff key in there also. Make sure you have that too.

 

[MeagerHair]

Thank you. That has to be on the floor, I will breakout the magnet.

 

[The Satch]

Thank you. That has to be on the floor, I will breakout the magnet.

Check in the female coupler as well