Green Tractor Talk banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hi
I'm new here and found your site doing reserch.
I have x485 and my steering hose got damaged when i installed my blower. What i to know is how do i remove the hose off the pump
or whatever that is under the deck? i got the one off the steering cylinder. any help would be helpful. I know it is very tight up under the deck. Any
suggestion on how to do this?

thanks guys!
DAve
 

·
Registered
Joined
·
2 Posts
Discussion Starter #2
well guess no one cares!!
Hi
I'm new here and found your site doing reserch.
I have x485 and my steering hose got damaged when i installed my blower. What i to know is how do i remove the hose off the pump
or whatever that is under the deck? i got the one off the steering cylinder. any help would be helpful. I know it is very tight up under the deck. Any
suggestion on how to do this?

thanks guys!
DAve
 

·
Administrator
Joined
·
17,321 Posts
Maybe it's just that nobody knows...

Here is all the help I can offer:
x485.gif


POWER STEERING CYLINDER AND LINES
CartkeyPART NO.PART NAMEQTY SERIAL NO.REMARKS
1AM128932Hydraulic Hose1
237M7460Screw1
M8 X 12
3AH89557Clip1
4T77814O-Ring2
538H1044Elbow Fitting1
6R28782O-Ring2
7JD7844Lubrication Fitting2
8M138876Boot2
911M7015Cotter Pin2
3.200 X 25 mm
1014H862Nut2
9/16"
CartkeyPART NO.PART NAMEQTY SERIAL NO.REMARKS
11AM128577Hydraulic Cylinder1
1238H1159Adapter Fitting1
13AM128931Hydraulic Hose1
14T36492O-Ring2
15R44302Tie Band1
 

·
Administrator
Joined
·
20,366 Posts
well guess no one cares!!
I doubt that it a case of 'nobody cares' but more like 'nobody who may know has read your post.' The members here are truly a very helpful bunch, but sometimes we get a question that isn't answered as quickly as others.

My suggestion would be to first remove the mower. Then maybe post a picture or two. I'm sure we can help you figure this out.:good2:
 
1 - 4 of 4 Posts
Top