Green Tractor Talk banner

1 - 5 of 5 Posts

·
Registered
Joined
·
127 Posts
Discussion Starter #1
In another thread I was asking about mounting suitcase weights on the front and it was mentioned to provide some type of method to make sure they don't come off. Seems a snow pile was able to push off the front weight, not found till spring!

I had been thinking about this for the rear weights also. My luck I would survive the tractor rollover only to be pummeled by suitcase weights!

I have to mount the rear weights on the inside because my shed is short. A piece of 3" wide welded on with 5/8" bar.

IMG_8208 (Large).jpeg IMG_8210 (Large).jpeg


The front was 2" and I used one of the bolts for the roll bar. Had to swap 2" long for 2 1/2" bolt. Don't mind the green paint on the bar, still tacky during final assembly.

IMG_8203 (Large).jpeg IMG_8204 (Large).jpeg IMG_8205 (Large).jpeg


Kevin
 

·
Premium Member
Joined
·
7,507 Posts
It may be just the angle of the picture; are the front weights hitting the tractor hood at the bottom?
 
1 - 5 of 5 Posts
Top